Solid Straps

Type H SVSS Polished/Satinized

The Guinand stainless steel solid strap Type H SVSS Matt with SVSS clasp consists of milled stainless-steel elements with solid lugs. It is equipped with a quick-change system for tool-free assembly/disassembly. Parts of the bracelet are polished, parts satin-finished.

The diving clasp SVSS can optionally be ordered with a hardened surface (surface hardness of about 1200 Vickers) to reduce scratches.


Technical Data

Length of the bracelet
approx. 190 mm (closed buckle), measured between the holes for the spring bars (at minimum position of the fine adjustment for length, 207 mm at maximum position of the fine adjustment).

Shortest length after removal of all screwed strap links
approx. 139 mm (fine adjustment for length at minimum position).

Thickness of the strap
approx 4.0 mm

Clasp
SVSS* clasp with 2 independently locking push buttons for increased security against accidental opening of the clasp, tool-free strap length adjustment up to approx. 1.7 cm in 11 steps using a button concealed in the clasp cover.

Surface
Center parts polished, H-type parts satinized, buckle and end links satinized – for our models with polished or satinized housings

Please choose your options

Metallband Typ H*
H.03.SVSS
289,00 

incl. VAT., plus shipping costs

This bracelet fits the following Guinand models with 20 mm lug width and a housing diameter of 40.6 mm:

  • Models from year of construction 2016 – recognizable by the serial number 2190 and higher
  • Models built before 2016 with English language engravings on the back/serial numbers greater than 2000

For Housings of an older design (recognizable by the chamfer on the top of the lugs or a serial number less than 2000) the solid bracelet is not suitable!

Important
For other models we cannot guarantee that the bracelet will have the right fit. The strap isn’t suitable for the models Series 20, 21, 60, 90 and 31!

Go back