Werksfahrer

Concentration on the essentials

Werksfahrer Chrono 1

The Series 60 were built in the early 80s for a short time and in small numbers with manual wind and Tricompax dial - now finally there is the successor of this design icon as the current Guinand model.

Guinand Werksfahrer Chrono 1

The Watch

For many decades, Guinand has also been producing sporty chronographs for motorists and racing enthusiasts. In the 1970s, a driver's chronograph with "tachometer design dial". In addition to Guinand, this watch was also produced by the Swiss manufacturer Orfina and offered as a Porsche Design Chrono I on the market. Our Series 60 series is the successor to this legendary sports chronograph. Among watch connoisseurs late versions from the end of the 70s are known with Tricompax dial - this variant was manufactured with a manual wind movement.

With our model 60.50 Tricompax we revive this rare variant in the series 60 again. In contrast to those days, an automatic chronograph movement Valjoux 7753 now drives the hands of the watch.

.

The Dial

Deep black absolutely matte dial with the brightest luminous grade X1 for optimal readability. Internal scale ring with 12 hour markings.


The Movement

The construction of the SW510 is based on the VJ7750 which has been developed in the 70s of the last century and continuously improved. It is arguably the most robust power source for a mechanical chronograph. The SW510 allows the realization of chronographs with Bicompax- and Tricompax dial.

Guinand receives this watch movement produced in Switzerland in a finely finished version with a Glucydur balance. At Guinand, each of these movements is once again adjusted in 5 positions, before the final inspection of the watch concludes with a multi-day running test.

* with the use of SW510A the design of the rotor slightly changed


The Housing

Our new Werksfahrer Chrono is built in a Series 60 case - the case design has proven itself over the past 30 years and has become a true classic. We have updated the housing construction. Sapphire crystal on the front and back, protected pushers and a screw-down crown with triple seal make the stainless steel housing pressure-resistant up to 20 bar.

The lugs are integrated into the housing and thus particularly well protected.


The housing technology

Protected pushers and a screwed crown with 3-way sealing system enables a reliable pressure resistance of 20 bar. FKM-R sealing system for crown and pusher.


Size comparison

Based on the size values, it is not easy to decide whether the watch fits the wrist, or whether it is too big or too small. To make your decision easier, we have mounted the watch on three different wrist widths that correspond to the usual sizes.

How to determine the correct strap length?

Please note that the wrists shown can only give you an approximate impression of the watch on your wrist, as the shape of the wrist is different for everyone, even if they have the same circumference.

Werksfahrer Chrono on the wrist
Medium size wrist (approx. 19 cm / 7.48 inch C)
Werksfahrer Chrono on the wrist
Smaller wrist (approx. 17 cm / 6.7 inch C)
Werksfahrer Chrono on the wrist
Stronger wrist (approx. 22 cm / 8.66 inch C)

The Strap

Lederband Chronissimo R

Armband Chronissimo

Our Werksfahrer Chrono fits all our leather and rubber straps with 20mm band lug width. We especially recommend our leather strap Chronissimo which is available both a white contrast stitching or red stitching and is seamlessly integrated into the case of the watch.

Model Configurator

Werksfahrer Chrono

Clasp
Current delivery time: 3 weeks
Price: 2.240,00  1.882,35 € (VAT excl.)

Incl. VAT, free shipping within Germany
For dispatch to countries outside the EU, VAT won't be charged. VAT Refund when purchasing the watch directly from our sales plant.
Unless otherwise specified, the delivery time is 2–3 weeks.

60.50-Tricompax_+_Chron-S-20-14-E-00

The Racer Chronograph

Maximum reduced dial with symmetrical division of the stop totalizers, deep black absolutely matte dial with the brightest luminous grade X1, up to date case design of the Series 60 with sapphire crystals on the front and back, protected push-buttons and a screw-down crown with double seal.

Leather Strap Chronissimo (short length)

High-quality watch strap made of black cowhide leather, integrated in the case. Raised bulge around the lugs, double stitched on the lugs, leather underlay on the clasp, white contrasting stitching. Strap thickness approx. 7.4 mm at the lug, approx. 4.4 mm at the end.

The strap progresses from approx. 25.8 mm to approx. 20 mm, the watch strap tapers towards the clasp, leather pad on the clasp.

Lug width 20 mm, for pin buckle or folding clasp with 20 mm width.

Strap length Chronissimo (short length)

Is the length of the strap sufficient for my wrist size?

ideal wrist circumference: 182 mm / 7.2 in
min. wrist circumference: 162 mm / 6.4 in
max. wrist circumference: 204 mm / 8.0 in

How to determine the correct strap length?

Go back

Technical details

Movement

  • Calibre SW510
  • Self-winding mechanical movement
  • Chronograph function integrated into the movement
  • 27 jewels
  • 28.800 vibrations per hour; 4 Hz.
  • Stone lever escapement
  • Stop-second
  • Shock resistant as per DIN 8308
  • Anti-magnetic as per DIN 8309/ISO 764
  • Movement diameter 13 1/4"" (30,4 mm)
  • Glucydur-Chronometer Balance Wheel
  • Incabloc shock protection
  • Power reserve approx. 60 hours
  • Movement decorated, weight segment with engraved Guinand logo
  • Unidirectional self-winding mechanism with ball bearing, weight segment made of heavy metal

Functions

  • Hours, minutes, subsidiary seconds
  • Chronograph with 30 min- and 12 hours counters and central second hand

Case

  • Stainless steel, hand satinized
  • Sapphire crystal glass, anti-reflective on the interior
  • Screwed back with sapphire crystal glass
  • Screwed crown, double O-ring sealed with flank protection
  • Protected pushers
  • Pressure resistant up to 20 bar

Dimensions and Weight

  • Case diameter: 40.5 mm
  • Case thickness: 14.9 mm
  • Band lug width: 20 mm
  • Lug-to-lug distance: 44.3 mm
  • Weight without strap: 86 grams